Drive with a given forward thrust while holding a heading.
More...
#include <auterion_sdk/control/surface_vehicle/thrust_attitude_control.hpp>
|
| | ThrustAttitudeSetpoint (float thrust, float heading_rad) |
| |
|
ThrustAttitudeSetpoint & | withThrust (float thrust) |
| | Sets the normalized thrust along the body x axis [-], in [-1, 1]. Negative drives in reverse.
|
| |
|
ThrustAttitudeSetpoint & | withHeading (float heading_rad) |
| | Sets the heading in the local ENU frame [rad]. 0 is East, positive is counter-clockwise.
|
| |
|
float | getThrust () const |
| |
|
std::optional< float > | getHeading () const |
| |
Drive with a given forward thrust while holding a heading.
The flight controller handles heading control, the thrust is passed through without speed control. Use this if your own controller handles the speed, or for open-loop thrust commands, e.g. when no velocity estimate is available.
Frames and units:
- Thrust is the normalized thrust along the body x axis (forward) [-]. It takes values in [-1, 1], negative values drive in reverse. Values outside this range are clamped.
- Heading is the yaw angle in the local ENU frame [rad]: 0 is East, positive is counter-clockwise (pi/2 is North). This is the same convention as the rest of the SDK, e.g. auterion::LocalPosition::heading.
Defaults:
- Thrust defaults to 0.
- If no heading is set, the vehicle holds the heading it had when it last received a setpoint without a heading. So a setpoint with only a thrust drives the vehicle straight ahead.
Example:
});
Defines a mode to control the vehicle using a (set) of setpoint types.
Definition mode.hpp:280
void onUpdateSetpoint(const std::function< Setpoint(float)> &callback)
Sets a callback function to be called at periodically at the update frequency of the mode.
Mode-wide limits for ThrustAttitudeSetpoint.
Definition thrust_attitude_control.hpp:90
Config & withMaxThrust(float max_thrust)
Limits the absolute forward and reverse thrust [-], in [0, 1]. Unset means a limit of 1 (full thrust)...
Definition thrust_attitude_control.hpp:98
Drive with a given forward thrust while holding a heading.
Definition thrust_attitude_control.hpp:78
ThrustAttitudeSetpoint & withThrust(float thrust)
Sets the normalized thrust along the body x axis [-], in [-1, 1]. Negative drives in reverse.
Definition thrust_attitude_control.hpp:124
ThrustAttitudeSetpoint & withHeading(float heading_rad)
Sets the heading in the local ENU frame [rad]. 0 is East, positive is counter-clockwise.
Definition thrust_attitude_control.hpp:133
std::variant< RateSetpoint, AttitudeSetpoint, multicopter::LocalFrameDynamicsSetpoint, multicopter::BodyFrameDynamicsSetpoint, multicopter::LocalFrameGotoSetpoint, multicopter::GlobalFrameGotoSetpoint, fixedwing::DynamicsSetpoint, fixedwing::GuidanceSetpoint, vtol::TransitionSetpoint, multicopter::LocalFrameAccelerationSetpoint, surface_vehicle::LocalFramePositionSetpoint, surface_vehicle::GlobalFramePositionSetpoint, surface_vehicle::SpeedAttitudeSetpoint, surface_vehicle::SpeedRateSetpoint, surface_vehicle::ThrustAttitudeSetpoint, surface_vehicle::ThrustRateSetpoint > Setpoint
Type alias for representing various types of setpoints.
Definition control.hpp:86
◆ ThrustAttitudeSetpoint()
| auterion::surface_vehicle::ThrustAttitudeSetpoint::ThrustAttitudeSetpoint |
( |
float |
thrust, |
|
|
float |
heading_rad |
|
) |
| |
|
inline |
- Parameters
-
| thrust | Normalized thrust along the body x axis [-], in [-1, 1]. Negative drives in reverse. |
| heading_rad | Heading in the local ENU frame [rad]. 0 is East, positive is counter-clockwise. |
The documentation for this class was generated from the following file: